AP2060G2, 6,0 m, Hydraulic Hose, 6,4 mm Internal Diameter, AZ3120 ends
Model: AP2060G2 | Series: AP | Product Line: Industrial Tools
- 4:1 Safety Factor.
- Wide range of standard hoses. Hoses can be supplied in any length on request.
- Rubber Guard on both ends.
- 3/8"-NPT thread on each end. Can be supplied with couplers on one or both ends.
- Internal Diameter 6,4 mm; Oil Capacity: 35 cm3 per metre.
- Minimum Bending radius: 115 mm.
- Apply 2 rounds of Teflon around all 3/8" NPT threads of the system, in the thread direction, leaving the first thread uncovered to prevent the tape breaking and entering the hydraulic system. Torque: 80 Nm.
- WARNING: Never disconnect the hose when the system is pressurized. Never exceed the maximum working pressure of the hose.