Hydraulic Hoses, AP-Series
- 4:1 Safety Factor.
- 700 bar working pressure.
- Wide range of standard hydraulic hoses up to 10 metres. Hoses can be supplied in any length on request.
- Rubber Guard on both ends.
- 3/8 inch;-NPT thread on each end. Can be supplied with couplers on one or both ends.
- Internal Diameter 6,4 mm; Oil Capacity: 35 cm3 per metre.
- Minimum Bending radius: 115 mm.
- WARNING: Never disconnect the hose when the system is pressurized. Never exceed the maximum working pressure of the hose.
- NOTE: Apply 2 rounds of Teflon around all 3/8 inch; NPT threads of the system, in the thread direction, leaving the first thread uncovered to prevent the tape breaking and entering the hydraulic system. Torque: 80 Nm.
All Products
Viewing 1-12 of 21
AP2008
AP2008, 0,8 m, Hydraulic Hose, 6,4 mm Internal Diameter, 3/8"-NPT ends
| Hydraulic Hose
€65.00 AP2015
AP2015, 1,5 m, Hydraulic Hose, 6,4 mm Internal Diameter, 3/8"-NPT ends
| Hydraulic Hose
€84.00 AP2020
AP2020, 2,0 m, Hydraulic Hose, 6,4 mm Internal Diameter, 3/8"-NPT ends
| Hydraulic Hose
€98.00 AP2030
AP2030, 3,0 m, Hydraulic Hose, 6,4 mm Internal Diameter, 3/8"-NPT ends
| Hydraulic Hose
€128.00 
Viewing 1-12 of 21