Enerpac Logo

AP2030G2, 3,0 m, Hydraulic Hose, 6,4 mm Internal Diameter, AZ3120 ends

Hydraulic Hose AP Series
Hydraulic Hose AP Series
  1. Hydraulic Hose AP Series
  2. Hydraulic Hose AP Series

AP2030G2, 3,0 m, Hydraulic Hose, 6,4 mm Internal Diameter, AZ3120 ends

Model: AP2030G2   |   Series: AP   |  Product Line:
  • 4:1 Safety Factor.
  • Wide range of standard hoses. Hoses can be supplied in any length on request.
  • Rubber Guard on both ends.
  • 3/8"-NPT thread on each end. Can be supplied with couplers on one or both ends.
  • Internal Diameter 6,4 mm; Oil Capacity: 35 cm3 per metre.
  • Minimum Bending radius: 115 mm.
  • Apply 2 rounds of Teflon around all 3/8" NPT threads of the system, in the thread direction, leaving the first thread uncovered to prevent the tape breaking and entering the hydraulic system. Torque: 80 Nm.
  • WARNING: Never disconnect the hose when the system is pressurized. Never exceed the maximum working pressure of the hose.