CN Nut-splitters
Request quotation
See full table
- Designed to work in two different ways, depending on the material grade of the nuts, either cutting or deforming them.
- CN0024 Model with integral pump, provides easier access for situations with limited access.
- CN0224 Model especially designed to cut the nuts of the guard rails.
- CN0324 Model, open design especially suitable for those situations when the normal design is not the best solution.
- Plastic carry box included for easy transport and tool protection.
- Relief valve on CN0024 to avoid overloading.
- All models are provided with a male ball quick coupler AZ3321.
- Caution: The tool cuts materials with a resistance lower than 500 N/mm² and deforms all materials up to a resistance of 1250 N/mm².
| Model | Capacity | Volumen | Lenght | Weight | Nut | Across Flats | Replacement Blade |
|---|---|---|---|---|---|---|---|
| LARZEP | kN | cm³ | mm | kg | mm | ||
| CN.00.24 | 135 | - | 471 | 4,3 | M12 - M27 | 19 - 41 | CRN.00.24 |
| CN.01.52 | 437 | 295,8 | 368 | 13,0 | M27 - M52 | 41 - 80 | CRN.01.52 |
| CN.01.80 | 1.134 | 478,8 | 435 | 40,0 | M68 - M80 | 100 - 115 | CRN.01.80 |
| CN.02.24 | 135 | 47,12 | 207 | 3,7 |
M12 - M24 | 19 - 36 | CRN.02.24 |
| CN.02.33 | 345 | 155,8 | 270 | 12,3 | M24 - M36 | 36 - 55 | CRN.02.33 |
| CN.03.24 | 135 | 49,0 | 296 | 5,0 | M10 - M24 | 19 - 36 | CRN.03.24 |