|
| |
 |
|
|
| |
| |
|
| |
|
Maximum
working pressure 700 bar.
All
models are provided with a male
ball quick coupler AZ3321.
The
CK0016 model includes a built-in
pump. In other models, oil is supplied
by an external hand, air, electric,
or petrol pump.
CK0225
and CK0250 models are double acting,
to assure a fast retraction.
|
|
| Download
|
|
|
|
Carrying
plastic box included for easy transport
and tool protection. The steel cutting-heads
can be mounted in the most convenient
position, so that cutting work in
forced and uncomfortable positions
may be easier, such as
poles, shafts or high-voltage towers.
Rotary
heads for easy operation.
The
CC0018, CC0040 and CC0075 models are
autonomous, with built-in pump to
make easier the work in difficult
positions. Those tools are supplied
with safety valve to prevent overload.
The
replacement of the blades is extremely
easy to do.
Single
acting models have spring return.
The
CC0260 model is double acting and
is especially recommended for sub-sea
applications. Optionally we can supply
special seal kits for deep waters.
|
| Download
|
|
|
|
Those
tools are designed to work in two
different ways, depending on the resistance
of the material of the nuts, cutting
or deforming them.
CN0024
Model with built-in pump, it makes
easier the most complicated and forced
position works.
CN0324
Model, open design especially suitable
for those situations when the normal
design is not the best solution.
All
cutting tools are supplied with a
carrying box for easy transport, ball
quick couplers and security valve
to avoid overloads.
CN0224
Model especially designed to cut the
nuts of the motorway fences.
Caution:
The tool cuts materials with a resistance
lower than 500 N/mm² and deforms all
materials up to a resistance of 1250
N/mm².
|
|
| Download
|
|
|
(FU-FV-FZ)
Hydraulic Pullers
|
|
|
|
We
supply a wide range from 5 to 50 ton
adapting to all your necessities
The
whole set is delivered in a strong wooden
box making easier their transport and
store operations after been used. They
are produced in high quality forged
steel and supplied in a full equip which
consist in two parts: Hydraulic part:
Includes cylinder, pump, hose, gauge
adaptor, gauge and male coupling. Mechanic
part: Includes all the accessories and
also the Grip puller, the Gross bearing
large extenders puller, the Gross bearing
short extenders puller, the Bearing
cup puller and the Bearing puller.
We
offer the possibility to supply only
the Mechanic part of the equipment in
smaller version: Only the Grip puller(FV/FX),
the simple Gross bearing puller set(FT),
the full Gross bearing puller set(FZ)
that includes large and short extenders
and also the Bearing cup puller(FI)
and the Bearing puller(FR).
|
| Download
|
|
|
(FA)
Self-Centering Pullers
| |
We
also supply the Self-centering Puller
(FA) available in 10, 20, 30 and 50
ton. Ergonomic, allows the overall movement
of the jaws making extremely easy to
be used individually. The big opening
of the jaws allows bigger diameter reach
and therefore makes the puller useful
for more operations. |
|
Download
|
|
|
| |
The
CY0109 and CY00822 series are supplied
with low flow female coupler AZ3240.
Used
for spacing pieces, positioning blocks
located at close distance, positioning
machines, nd as tools for rescue-equipment
and maintenance works (standard equipment
in this case).
The
CY0109G and CY00822G models are supplied
with a high flow female coupler AZ3140. |
| Download
|
|
|
(AA)
Lifting Cushions
| |
Pneumatic
cushion made of friction resistant material.
Collapsed
height of 28 to 30 mm.
Working
pressure: 8 bar.
Often
used in rescue operations, rubble lifting
in collapses, etc.
Excellent
for lifting loads at restricted spaces.
|
|
Download
|
|
|
| |
When
used as tensiometers these dynamometers
are measuring the tension of cables,
pulling bars, and can also be used as
a weighting device. The gauge includes
tell-tale pointer which records maximum
load registered.
These
portable compression type load cells
read the forces being exerted on then.
Remote mounted gauges with hose can
be delivered.
Accuracy
+/-4%
|
Download
|
|
|
|
|
|
|
| Last News |
| LARZEP GB LTD |
| |
LARZEP opens a new facility north of Lon... |
|
| |
|
|
| NEW CATALOGUES!!! |
| |
January 2007
From now on,... |
|
| |
|
|
| |
See more
|
|
|
|
Last Modified:
01.03.2010 |
| |
