| |
| |
 |
Catalogue:
Cylinders [ Features
/ Types ] |
|
| |
|
|
| |
|
| |
|
|
|
SM
cylinders are equipped with hardened
grooved saddles. In case of operation
under side loads, LARZEP can supply
tilting saddles.
Industrial
general purpose cylinders. Designed
for use in all positions. Provided with
collar threads and threads at the top
of the piston and at the base, for easy
fastening. Hard chrome-plated piston
with wiper seal extend cylinder life.
Heavy cylinders have carrying handles
or eye bolts as standard.
SM01002
and SM01502 models are not provided
with removable saddles. The top side
of the piston has been hard-treated
to upgrade its resistance.
|
|
| Download |
|
|
|
Available
both in single and double acting.
Designed for carrying out push and
pull operations. Tightening of cables,
bars, bolts, etc. Extraction of sleeves,
bearing, etc.
Hollow
hard chrome-plated piston. Collar
threads for easy fixing. Interchangeable
saddles: plain, threaded or solid.
Spring return. |
|
|
| Download |
|
|
|
Single
Acting and low height cylinders. Available
in two versions: SP load return and
SMP spring return. Light weighted,
low profiled for use in confined spaces:
machinery positioning works, tool
fastening, load test on pillars, etc.
Capacity
up to 100 ton, stroke up to 150 mm.
Grooved saddles. Models from 30 to
100 ton have optional tilting saddle.
Models
of 10 and 20 ton are not available
with interchangeable saddles. The
top of the piston has been hardened
to improve the resistance.
All models are black nitrated except
from SMP10015 and SP10015.
|
|
| Download |
|
|
| |
Low
profiled and single acting cylinders,
available in two versions: SX load
return and SMX spring return. For
use in confined spaces: machinery
positioning works, tool fastening,
load test on pillars, etc.
Capacity
up to 150 ton, stroke up to 16 mm.
Grooved saddles. SX models from 50
to 150 ton have optional tilting saddle.
Removable
saddle in SX from 50 to 150 ton.
|
| Download
|
|
|
|
Single
acting cylinders, load return with
lock nut designed to support loads
mechanically.
Used
for foundation supporting: bridge
construction, buildings and shipbuilding,
etc. Loads are fully held mechanically
for long periods of time, thanks to
the lock nut. LARZEP supplies these
cylinders with optional tilting saddles;
their use is highly recommended.
|
|
| Download
|
|
|
| |
Single
acting, load return, pancake lock
nut cylinders, designed to hold full
loads mechanically. Special coating
and tilting saddle to improve corrosion
resistance and performance under side
load. |
|
|
| Download
|
|
|
| |
These
Telescopic Single Acting Cylinders
are designed for use where there is
a minimum clearance for the insertion
of cylinder and a very high lift is
necessary. |
|
|
| Download
|
|
|
| |
SMA
cylinders are made of high strength
aluminium alloy. Spring return type
and two versions available: Solid
piston SMA or hollow piston SHA.
The
body, stop ring and piston of the
cylinder are anodized to strengthen
the working area and extend its working
life. The weight reduction makes them
especially suitable for use in sites
of difficult access. It is highly
recommended to place the cylinder
on a flat area in order to avoid any
damage to the base.
|
| Download
|
|
|
|
SHA
cylinders are made of high strength
aluminium alloy. Spring return type
and two versions available: Hollow
piston SHA or Solid piston SMA.
All
the aluminium parts of the cylinder
are hard anodized to strengthen the
working area and extend its working
life.The weight reduction makes it
especially suitable for use in sites
of difficult access. It is highly
recommended to place the cylinder
on a flat area in order to avoid any
damage to the base.
|
|
| Download
|
|
|
|
|
Single
acting cylinders, load return. Suitable
for offshore jacking. Designed for weighing,
lifting and positioning works in Civil
Engineering.
Equipped
with hardened grooved removable saddles.
Upon request, these cylinders are supplied
with tilting saddles for protection
from side loads, which is highly recommended
by LARZEP. Overflowing under control
acts as stroke limiter. For confined
spaces and loads up to 150 ton see SX
models.
|
| Download |
|
|
| |
Designed
for any application requiring pulling
forces, for example to hook and join
sheets for welding, tighten cables,
etc.
Models
equipped with joint have a 30 mm shorter
stroke.
Cylinders
of T series are supplied upon request
in the CA maintenance equipments. Also,
they match their accessories perfectly.
See catalogue A2002.
Double acting pull cylinders. TD
series.
High
strength steel construction. Hard chrome-plated
piston. Optional metallic joint for
piston protection and longer life.
|
| Download
|
|
|
| |
For
push and pull applications. Designed
to execute all kind of hard works, including
those requiring high precision and involving
high cycle life.
Hard
chrome-plated piston. Guide and seal
system of highest quality. Safety valve
for prevention from accidental over-pressure.
Collar threads for easy fixing and pull
operations. |
| |
| Download |
|
|
|
Available
both in double DH and single SH acting.
Designed for carrying out push and
pull operations. Tightening of cables,
bars, bolts, extraction of sleeves,
bearings, etc.
Hollow
hard chrome-plated piston. Collar
threads for easy fixing. Interchangeable
saddles: plain, threaded or solid.
Double
acting cylinders are equipped with
a safety valve which prevents accidental
over-pressure. Quick return assured
by oil pressure.
Models
DH15018and DH10004 have not external
thread. H1=60 mm in model DH10004.
Available
both in double DH and single SH acting.
Designed for carrying out push and
pull operations. Tightening of cables,
bars, bolts, extraction of sleeves,
bearings, etc.
|
|
| Download |
|
|
| |
Double
acting cylinders for harsh conditions
in both vertical and horizontal positions.
Hard chrome plated piston with wiper
seal for extended cylinder life. The
hardened saddles can be replaced, if
necessary, by a tilting saddle for a
better performance under side loads.
Upon
request, LARZEP supplies the DDR cylinders
with threads or any other special features:
lock nuts, sleeves, etc. |
| |
| Download |
|
|
|
|
|
|
| Last News |
| LARZEP GB LTD |
| |
LARZEP opens a new facility north of Lon... |
|
| |
|
|
| NEW CATALOGUES!!! |
| |
January 2007
From now on,... |
|
| |
|
|
| |
See more
|
|
|
|
Last Modified:
01.03.2010 |
| |
