> Hoses. AP2 series; 700 bar working pressure. The oil capacity is 35 cm³/m, this volume must be considered when choosing the correct pump. We supply a wide range of hoses from 0,8 metres to 12 metres. This length allows the operator to be as far from the working area maximizing the security in the zone. The hoses can have at each end a 3/8 NPT thread or a high flow coupler or both of them.

   > The Quick couplers range goes from low flow (6 litres/min) to high flow (40 litres/min). Male and Female can be supplied separately.

   > The Tilting Saddles (AZ04) are highly recommended for side loads. They avoid the possible wearing of the cylinder. These saddles, admit 5º inclinations, and are available for the following cylinder series: SM, SX, SMP, ST, SMA, SSR, D, and DDR.

The Hollow Saddles (AZ05) are used in hollow piston cylinders, especially in extraction operations and as support. These saddles can be plain, threaded or solid. The cylinder series that can admit these kinds of saddles are: SH, SHA and DH.

   > The flow and pressure control valves (AZ5) are designed for 700 bar working pressure. All oil ports have 3/8 NPT thread to prevent leakage. They can be:

• - Snubber valve
• - Flow regulating valve with 2 outlets.
• - Manually operated check valve.
• - Single way flow regulating valve.
• - Check valve.
• - Pressure relief valve.
• - Pilot operated check valve.

   > The directional control valves can be 3 or 4 ways, for single and double acting cylinders. Manually operated, with or without spring and solenoid, suitable for operation combined with a pump or remote control. Possibility of select open or closed centre.

   > The gauges, essential for knowing in each moment the working pressure, with high accuracy of full scale, some models are supplied with double reading in ton and Kg/cm². We also provide glycerine gauges and gauges with Maximum indicator.

We also have a wide range of Fittings and Manifolds (AZ1) for multiple applications: Hexagon Nipple, Adaptor, Female adaptor, Plug, Adaptor Elbow, Elbow, Tee, Cross, Gauge adaptor and Manifolds.