Skip to content. | Skip to navigation

+34 943 17 12 00

Performance under Pressure

Pump selection

To select the right pump, follow the steps below:

  • Select the cylinder trying not to exceed 80% of its nominal rating on both, load and stroke.
  • Select the pump according to the oil volume and the number of cylinders in operation.
    NOTE: We must add 35 cm³ of oil per meter of hose we use.
  • Use the chart below as a guide; it assumes the use of one cylinder only. For several cylinders you must add up the oil capacities. (Click on the picture below)
pump selection